Battery Box.
-
awleblanc1941
- Posts: 29
- Joined: Sun Feb 09, 2014 5:21 pm
Battery Box.
Does anyone have the dimensions for the original battery box on the CA-1 ?
-
awleblanc1941
- Posts: 29
- Joined: Sun Feb 09, 2014 5:21 pm
Re: Battery Box.
I'll have to reply to my own post about the battery box. I picked one up recently. Art
Re: Battery Box.
Congratulations. Tough part to find.
Was it new or used?
Do you have a picture that you can post?
Was it new or used?
Do you have a picture that you can post?
1942 Chevy 125 Crash Truck from Dow AAFB,
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x2) 194? Wood Ben Hur
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
1944 Chevy 325 Fire Truck
1942 WC-54 Ambulance
1944 M29C Weasel
1945 CCKW 353 A2 Open Cab "Air-portable"
1943 M5 High Speed Tractor
1942 Sperry Searchlight setup with GE Generator
1942 M-1 Fruehauf Searchlight Trailer (G221)
1942 M-17 Fruehauf Quad 50 Trailer (G221)
1942 M-10 Ammo Trailer (x3)
194? Steel Ben Hur (x2) 194? Wood Ben Hur
1945 Case VAIW-3 Aircraft Tug
1943 Case VAI USAAF with Mower
1944 Clark CA-1 Airborne Dozer
1944 PE-95G, 1944 PE-99B
-
awleblanc1941
- Posts: 29
- Joined: Sun Feb 09, 2014 5:21 pm
Re: Battery Box.
I will try. I can't seem to be able to access photos. I had sent Ken some pictures of my project, maybe I can send them to him again and post them that way. I,m sure that there is an easier way but I don't know how. Art
Re: Battery Box.
Thank you.
How to post pictures is in the board FAQ's.
viewtopic.php?f=3&t=48
They have to be hosted to use those directions.
or you can use the upload attachment tab directly below. Find the pic by file name on your PC and it is stored on the site.
Bill
How to post pictures is in the board FAQ's.
viewtopic.php?f=3&t=48
They have to be hosted to use those directions.
or you can use the upload attachment tab directly below. Find the pic by file name on your PC and it is stored on the site.
Bill
- Attachments
-
- post_snip.JPG (13.38 KiB) Viewed 21575 times
-
ken from worcester
- Posts: 96
- Joined: Sun Mar 25, 2012 12:18 pm
arts box dimensions
sent to me By Art I thought i should pass it on
thanx ken
All stock is 1/16 inch thick.
Base; 1in. rise and 1-1/2 in. bottom.
10-1/8 in. x 7 in. outside measurement
this is made from one single piece of stock with a 7-1/4 in. by 4 in. cutout in center.
Top; 10-1/2 in. by 7-3/8 in. outside
7/8 in deep with 1/4 in lip
Flanges welded to side for hold down bolts and latch clip (see photo) I sent you
Top cover; 10 in. by 7 in. outside
1-1/4 in deep with cable flares to side (see photo)
Hinges; 1-1/4 in. wide welded to cover
thanx ken
All stock is 1/16 inch thick.
Base; 1in. rise and 1-1/2 in. bottom.
10-1/8 in. x 7 in. outside measurement
this is made from one single piece of stock with a 7-1/4 in. by 4 in. cutout in center.
Top; 10-1/2 in. by 7-3/8 in. outside
7/8 in deep with 1/4 in lip
Flanges welded to side for hold down bolts and latch clip (see photo) I sent you
Top cover; 10 in. by 7 in. outside
1-1/4 in deep with cable flares to side (see photo)
Hinges; 1-1/4 in. wide welded to cover
Re: Battery Box.
Well, I am new to the Clark restoration game. I now have one and am missing this box. I am adept as welding and fabricating but often it is better to see the drawing with the original dimensioned out. I am hoping someone will do that.
By the way, I am looking for parts so if there are any dozer guys who have spares, contact me here. Thanks
By the way, I am looking for parts so if there are any dozer guys who have spares, contact me here. Thanks