Page 1 of 1
track rollers
Posted: Sun Nov 24, 2013 11:53 am
by dnelsen
Hi I am restoring a clark ca-1 dozer and wondered who can help find me some rollers or who machines them. thanks really appreciate Don Nelsen
Re: track rollers
Posted: Thu Nov 28, 2013 6:51 pm
by ken from worcester
how many do you need I have a lot of them 20 or so alot of them were converted to tapered bearings where are you at in the world I am in mass
thanx ken
http://s834.photobucket.com/user/milita ... ary?page=1
thanx ken
Re: track rollers
Posted: Thu Nov 28, 2013 7:23 pm
by ken from worcester
HI don are you sure they can not be rebuilt I just finished the rollers for one of my Clarks the bearings were easy to get on ebay i got 30 bearings for 70 dollars the shafts were worn but I was able to use locktite bearing locker with good results I did a test on one of the shafts and bearing it took a 20 ton press to remove it. I used the old seals and made new outer washer plates on a laser the bearing came with seals on both sides I removed the inner ones before installing
thanx ken
Re: track rollers
Posted: Thu Feb 13, 2014 7:18 pm
by awleblanc1941
Ken, do you have any rollers left for the Clark? Art
Re: track rollers
Posted: Fri Feb 14, 2014 7:52 pm
by ken from worcester
yes I have a few I have a total of 5 machines in parts I am trying to get two back together call me when you can
thanx ken