track rollers

[dnelsen]

Hi I am restoring a clark ca-1 dozer and wondered who can help find me some rollers or who machines them. thanks really appreciate Don Nelsen

[ken from worcester]

how many do you need I have a lot of them 20 or so alot of them were converted to tapered bearings where are you at in the world I am in mass
thanx ken http://s834.photobucket.com/user/milita ... ary?page=1
thanx ken

[ken from worcester]

HI don are you sure they can not be rebuilt I just finished the rollers for one of my Clarks the bearings were easy to get on ebay i got 30 bearings for 70 dollars the shafts were worn but I was able to use locktite bearing locker with good results I did a test on one of the shafts and bearing it took a 20 ton press to remove it. I used the old seals and made new outer washer plates on a laser the bearing came with seals on both sides I removed the inner ones before installing
thanx ken

[awleblanc1941]

Ken, do you have any rollers left for the Clark? Art

[ken from worcester]

yes I have a few I have a total of 5 machines in parts I am trying to get two back together call me when you can
thanx ken