I am letting the 3rd Clark go to a good home. Asking price is $4900 with a little wiggle room, that includes a spare main frame and a spare Waukesha FC engine (Type 182-same bore and stroke).
REG No.: 44 CA-1 SN 1441158, USA-9113112
DETAILS: The CA-1 has been sitting in a junk yard in OK for the last 12 years. It ran prior to that, but now does not. The tracks and drive train are not free wheeling. The engine is probably stuck as well. There is oil on the dip stick, but no sign of water. The main frame has been weld cut just by the sprockets. This is common as it helped to prevent mud build up by the sprocket. That is why I am adding an extra frame in VG condition. There is plenty of room on the idle adjustment screw to tighten track, so once everything is cleaned up you should have ample wear remaining. There is no Braden wench. The seat frame is partial and the tool box is rusted through mostly, but you should be able to make a simple replacement using the orig. as a pattern.Rubber Hyd lines are dry rotted. The RS piston frame has weld spots near the bottom. The original finish is clearly visible on many parts of the machine, most notable on the engine cover. The LS sand box still shows the stencil for GWT 4195. I retained the oil filter and pre-cleaner for No. 1's restoration, but I will add the one I fashioned for it. You can see it's photos in my G posts under the first CA-1 restoration. I have many other parts available, so if in the course of the restoration you need something else, we can work things out. 'Nuf said for now!
CONTACT: pm me for additional info and I can pass you my phone number at that time for a detailed discussion.
TERMS: Cash or Check, $500 down, rest on pick-up.
TRANSPORTATION: That will be up to you. I can arrange for a hoist to lift it onto your trailer at your expense. I can store it for up to a year if you need, but that will require 1/2 down.
