Page 1 of 1
What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 8:00 am
by dachoppa
NO WHERE, no where in any of my manuals does it actually state the type and description of the specified hydraulic fluid, or oil, to be used in the Clarks Ca-1 system.
Anyone have any information or specifications in any of your manuals? I thought it would be under the "capacities" section but no.
I even have an entire section in the manual I own thats devoted to the assembly, repair and putting into service the hydraulic blade and system for this tractor.
But it has absolutley no reference to the correct fluid, or oil to use. Its probably pretty basic, who knows. probalby only one type of hydraulic oil, I just aint that versed in these things... But after seeing that the gear box required "mineral oil" I thought it wouldnt hurt to make sure.
Re: What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 4:32 pm
by 17thairborne
I'm still looking!
Re: What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 4:38 pm
by 17thairborne
I sent an email to Olivier who has the hyd manual for the clark. We'll see what he turns up.
Re: What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 5:44 pm
by USAAF
Hi Oz
This scanned page from the hydraulic manual TM5-1270 may help!!
SAE30 thats certainly what I topped my system up with, maybe there is a better modern oil but at least with SAE30 there is no chance of eating away original rubber seals.
Cheers
Paul
Re: What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 7:46 pm
by 17thairborne
Paul,
You are terrific!
Re: What oil or Hydraulic Fluid is used?
Posted: Thu Jan 19, 2012 9:16 pm
by dachoppa
are you saying this is a standard "Engine" oil?
SAE 30 weight straight engine oil?
hummmm.
now that I see the "stuff" that came out, it dont really look like engine oil, but then again, it dont look "amber" in color like hydro oil either.
Do any of you think that IF there was say, Hry oil in there, and I replaced with ,say, 30 weight engine oil? (if thats what I am reading here) would it hurt anything to mix them?
Dave
Re: What oil or Hydraulic Fluid is used?
Posted: Fri Jan 20, 2012 10:39 am
by dachoppa
talked to the previuos owner.
he too said that it should be 30 weight engine oil.. He also mentioned that engine oil was the common fluid to use in hydraulics during that time.
New one on me.. Not that OI am any expert here, in fact, very far from it.. Just seems that engine oil, well, its for engines, not hydraulics!
So, I guess that question is answerd: Ill be replacing with straight 30 weight engine oil and be done with it
Re: What oil or Hydraulic Fluid is used?
Posted: Tue Feb 11, 2014 7:03 pm
by awleblanc1941
The oil used in the BABX Hydraulic Bulldozer is Summer SAE-30 ( OE-30 ) and Winter SAE-10 ( OE-10 ) This info can be found on page 12 Section 1 Operator's Instruction manual for LaPlant-Choate Bulldozer on " CLARKAIR " Tractors. This comes a little late as I just joined this site. awleblanc
Re: What oil or Hydraulic Fluid is used?
Posted: Tue Feb 11, 2014 9:15 pm
by ken from worcester
I am not sure I was told mineral oil but it was not correct I was at the home of a Clark owner last Sunday he told me 20 weight in everything but the motor 30 in it
my operators manual states
gas tank 10 gal
crank case 4 quarts oe 30 above 32f oe10 below 32 f
transmission 1 qt oe 30
forward and reverse clutch housing oe 30 above 32f oe10 below 32 f
final drive clutch housing 10qt oe 30
right and left final drive gear housing 5 1/2 qt oe 30
radiator 12qt
note do not use any lubricant with any free sulpher
thanx ken
one of my machines
http://s834.photobucket.com/user/milita ... 6.jpg.html
