Page 1 of 1
Throttle Lever and Choke Cable
Posted: Mon Jan 16, 2012 12:14 pm
by 17thairborne
Here are the measurements for the throttle lever plate. I had to photo shop the lever out of the image so that I could show only the plate. The pieces are secured together with a rivet. I have a few more drawings to do to finish the lever. If someone needs them let me know.
Re: Throttle Lever
Posted: Mon Jan 16, 2012 12:42 pm
by 17thairborne
Here is the drawing for the lever
Re: Throttle Lever
Posted: Mon Jan 16, 2012 6:26 pm
by 17thairborne
Here is the drawing for the pawl. Please keep in mind this was hard to accurately measure as it is riveted under the two handle levers.
Re: Throttle Lever
Posted: Sat Feb 04, 2012 11:03 am
by k charles
I am new here but have a ca1. I'm not going to restore it just get it so I can use it. Yesterday I took my throttle apart and then found this site. If I can get the picture on here I have the pawl out as the point was worn off.
Re: Throttle Lever
Posted: Sat Feb 04, 2012 11:32 am
by 17thairborne
Charles,
Welcome to the forum! We are glad to have you and appreciate every effort you make to post images. If there is anything we can do to help please let us know. If you are interested in doing so, please post your vehicle's SN and Reg No for the data base..that is if you feel comfortable doing so.
Again
Welcome!
Re: Throttle Lever and Choke Cable
Posted: Fri Feb 17, 2012 9:01 pm
by 17thairborne
Recent ebay purchase to replace the Choke knob and cable. I believe there are more avail. Paid 24.99 or something like that. NOS in the original unopened package.
